拼焊板柱面扁壳成形焊缝移动与回弹研究  

Research on weld-line movement and springback of during forming cylindrical surface shallow shell of tailor-welded blank

作　　者：李路娜 范世祥 陈赵 桑晶 

机构地区：[1]南京机电职业技术学院机械工程系,江苏南京211135

出　　处：《模具工业》2015年第12期17-21,共5页Die & Mould Industry

基　　金：江苏省"十二五"高等学校重点专业建设(高职高专)项目(192);南京机电职业技术学院院级科研项目(ZD201207)

摘　　要：建立柱面(X向)和曲面方向(Y向)焊缝的柱面扁壳有限元模型,改变压边力、板厚比,研究拼焊板拉深切边成形时的焊缝移动、曲面方向回弹及其相互关系,并与光板对比。结果表明:压边力大小影响焊缝移动,曲面方向回弹随压边力增加而减小;Y向焊缝拼焊板回弹最大,光板及X向焊缝拼焊板厚侧次之,薄侧最小;板厚比不低于0.5时,板料成形性能平稳且焊缝偏移量、回弹随板厚比减小而增加,在实际应用中得到验证。A finite element model about cylindrical surface shallow shell was simulated with the welding line on cylinder （X） and curve （I0 direction. Through changing the blank hold- er force and plate thickness ratio, the weld-line movement, the springback direction of curved surface and their relationship in the process of drawing and trimming tailor-welded blanks were studied. Compared with that of non-welded blanks, the results showed that the blank holder force affected weld-line movement and springback in the curve direction was reduced with the increase of blank holder force. The springback of tailor-welded blanks in Y direction was the maximum, the non-welded blanks and the thick section of tai- lor-welded blanks in X direction was less, while the thin section was the minimum. When plate thickness ratio of tailor-welded blank was more than 0.5, its forming capability of was stable and both weld-line movement and springback were reduced with the increase of plate thickness ratio, which has verified in the practical production.

关 键 词：拼焊板 压边力 焊缝移动 回弹 

分 类 号：TG386[金属学及工艺—金属压力加工]