紫金山铜金矿石高压辊磨产品特性研究  

Study on product characteristics of Zijinshan copper-gold ore by high pressure grinding roller

作　　者：马英强[1] 印万忠[1] 吴凯[1] 黄发兰 李晓慢 

机构地区：[1]福州大学紫金矿业学院,福建福州350116

出　　处：《福州大学学报（自然科学版）》2015年第6期864-868,共5页Journal of Fuzhou University(Natural Science Edition)

基　　金：国家自然科学基金资助项目(51374079);福建省自然科学基金资助项目(2015J05101);福州大学科技发展基金资助项目(2014-XQ-41);福建省大学生创新创业训练计划资助项目(201410386081);福州大学科研启动基金资助项目(510057)

摘　　要：针对紫金山铜金矿石,开展了不同破碎方式下产品的粒度特性、裂纹性质、比表面积、孔体积和相对可磨度研究.结果表明,与常规破碎方式相比,经高压辊磨机粉碎后物料的中值直径更小,粒度分布更均匀,细粒级含量多;高压辊磨机在辊面压力为3.5 MPa时粉碎后物料的比表面积和孔体积为2.544 m^2·g^(-1)和11 mm^3·g^(-1),比常规破碎产品分别提高了12.36%和22%;高压辊磨机在辊面压力为5.5 MPa时粉碎后物料的比表面积和孔体积分别为2.568 m^2·g^(-1)和13 mm3·g^(-1),比常规破碎产品分别提高了13.42%和33%,表明高压辊磨机粉碎物料粒度细、颗粒裂纹更多,且高压辊磨机粉碎后物料由于裂纹丰富,故更易磨.The size characteristic,the property of crack,the surface area,the pore volume and the relative grind ability of the products of different comminuting process were studied for Zijinshan copper-gold ore. The results show that the products crushed by HPGR contain smaller median diameter,more equal particle size distribution and the superior fine fraction content than that of the conventional crushing ore samples. For the samples crushed at high pressure roller surface pressure 3. 5 MPa,their surface area and pore volume are 2. 544 m^2·g^（-1） and 11 mm^3·g^（-1）,respectively improved to 12. 36%and 22% compared with that of the conventional crushing ore samples. For the samples crushed at high pressure roller surface pressure 5. 5 MPa,their surface area and pore volume are 2. 568 m^2·g^（-1） and 13 mm^3·g^（-1）,respectively improved to 13. 42% and 33% compared with that of the conventional crushing ore samples,which indicate that more finer fraction content and more cracks exist in the products crushed by HPGR,and with the abundant cracks the samples are easier to ground.

关 键 词：高压辊磨机 铜金矿 粒度特性 比表面积 孔体积 

分 类 号：TD952[矿业工程—选矿]