检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]贵州工程应用技术学院,贵州毕节551700 [2]西安理工大学岩土工程研究所,陕西西安710048
出 处:《地震工程学报》2015年第3期816-822,833,共8页China Earthquake Engineering Journal
基 金:国家自然科学基金项目(No.41272320);贵州省自然科学基金项目(黔科合J字LKB[2012]13号);贵州省教育厅自然科学重点项目(黔教合J字[2013]69号)
摘 要:土的结构性是土颗粒空间排列和粒间粘结综合作用所表现出来的力学效应。在地震荷载作用过程中,天然土边坡的结构性参数主要体现应力和变形的共同作用,反映地震荷载作用过程中应力和变形的协调关系及结构性土的结构损伤过程(即抗剪强度参数的变化规律)。首先通过分析认为用结构性参数来定量判断地震荷载作用过程中黄土边坡的稳定性更具合理性,其物理意义更明确;其次通过分析黄土地区某一天然边坡在Ⅸ度地震烈度作用下的黄土边坡动力稳定性,验证结构性参数作为边坡稳定性分析判据的可行性,且这一方法能定量地确定边坡滑动面的位置及所对应的安全结构性参数。The structural property of soil is derived from mechanical effects as well as the comprehensive effect of the spatial arrangement and bonding effects of soil particles.During the process of seismic loads,the structural parameters of natural loess slope are derived mainly from the combined effects of stress and deformation.Meanwhile,that parameters reflected the coordination between stress and deformation during the process of seismic load and the structural damage process of the loess during the seismic process.It was shown that using structural parameters to quantitatively determine the loess slope stability was more reasonable during the process,and its physical meaning was very clear.Second,analysis of the dynamic stability of the natural loess slope was used to verify the feasibility criterion by structural parameters,and this method could be used to quantitatively determine the location of slip surfaces and corresponding structural parameters.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200