AlCrMoTiNi(Zr)高熵合金的组织与性能  

Microstructure and Properties of AlCrMoTiNi(Zr)High Entropy Alloys

作　　者：张国玺 滕瑛瑶[2] 任波[2,3] 赵瑞锋[4] 

机构地区：[1]郑州幼儿师范高等专科学校 [2]河南工程学院机械工程学院 [3]郑州大学材料科学与工程学院 [4]河南工程学院理学院

出　　处：《特种铸造及有色合金》2015年第12期1233-1236,共4页Special Casting & Nonferrous Alloys

基　　金：中国博士后基金面上项目(2013M541986);河南工程学院博士基金资助项目(D2013013)

摘　　要：采用粉末冶金工艺制备了AlCrMoTiNi和AlCrMoTiZr两种合金,采用X射线衍射仪、扫描电镜和数显硬度计对铸态和退火态合金的组织与硬度进行了分析。结果表明,AlCrMoTiNi合金由FCC和BCC固溶体组成,而AlCrMoTiZr合金由BCC相和金属间化合物组成,两种合金经700~1 000℃退火后,其物相和组织结构并未发生明显改变。AlCrMoTiNi和AlCrMoTiZr铸态合金的硬度（HV）分别为447和623,退火后最高硬度（HV）分别达到615和656。The AlCrMoTiNi and AlCrMoTiZr alloys were prepared by powder metallurgy process.The microstructure and hardness of the as-cast and annealed alloys were characterized by X-ray diffraction,scanning electron microscopy and digital display Vickers hardness tester.The AlCrMoTiNi alloy was composed of a mixed structure of FCC and BCC solid solution phases.The AlCrMoTiZr alloy consists of BCC solid solution phase and intermetallic compound phase.After annealed at 700~1 000℃,absence of the phases change in the two alloys can be obserevd.The hardness of the AlCrMoTiNi and AlCrMoTiZr alloys reaches 447 HV and 623 HV at as-cast condition,and reaches 615 HV and 656 HV at annealed condition,respectively.

关 键 词：粉末冶金 高熵合金 微观组织 固溶强化 时效硬化 

分 类 号：TG139[一般工业技术—材料科学与工程]