刨煤机落运能力计算与仿真分析  

Calculation and Simulation of Drop and Transport Capacity of Coal Plough

作　　者：张建军 田震[2] 胡登高 

机构地区：[1]中煤张家口煤矿机械有限责任公司,河北张家口075025 [2]辽宁工程技术大学机械工程学院,辽宁阜新123000 [3]中国煤矿机械装备有限责任公司,北京100011

出　　处：《煤矿机械》2015年第12期41-44,共4页Coal Mine Machinery

基　　金：国家高技术研究发展计划(863计划)资助项目(2013AA06A412)

摘　　要：基于对刨煤机落运能力的分析,建立了不同刨煤方法条件下输送机单位长度货载量的数学模型。通过分析刨速、输送机速度与刨煤机落运能力的关系,找出了刨速、截深对输送机货载均匀性的影响。利用C++语言编制出装载过程仿真软件,得到了不同刨煤方法下刨头速度与输送机速度之间的合理匹配区间,研究结果为刨煤机、输送机的速度控制以及实现输送机货载量的均匀性提供了依据。Established a mathematical model of loading amount per unit length of conveyor under different coal plough method based on analysis of coal plough drop and transport capacity. Cutting speed, cutting depth impact on transport goods uniformity was found by analyzing the relationship between cutting speed, conveyor speed and drop and transport capacity. Loading process simulation software was developed by using C ＋＋ language,reasonable matching range between cutting speed and conveyor speed was obtained. The results provide a reference for the control of cutting speed and conveyor speed and the uniformity of conveyor loads.

关 键 词：刨煤机 输送机 落运能力 货载量 仿真 

分 类 号：TD421.6[矿业工程—矿山机电]