基于3×3耦合器相位解调的光纤声音传感器设计  

Design of fiber acoustic sensors based on 3 × 3 coupler phase demodulation

作　　者：吴锋[1] 吴柏昆 余文志 钱银博[1] 何岩[2] 

机构地区：[1]华中科技大学光学与电子信息学院,武汉430074 [2]烽火通信科技股份有限公司,武汉430074

出　　处：《激光技术》2016年第1期64-67,共4页Laser Technology

基　　金：国家自然科学基金资助项目(61290315);国家科技支撑计划资助项目(2012BAH06B03)

摘　　要：为了在某些应急情况下无源传输声音信号,采用基于光纤迈克尔逊干涉仪原理光纤声音传感的方法结合了收音弹性盘片和光纤粘接的工艺设计,使用3×3耦合器相位解调方法对传感信号进行相位解调,实现了一种新型光纤声音传感器系统。给出了干涉仪3路输出信号相位差的表达式,利用最小二乘法拟合求出干涉仪3路输出信号的平均相位差,取得了仿真与实际测试数据。经过测试,该系统可以准确有效地还原出设计带宽内的声音信号。结果表明,该光纤声音传感器系统适用于电磁恶劣等应急环境中,验证了该设计方案的可行性。In order to transport acoustic signal passively in some emergent cases , a fiber acoustic sensor was designed based on the principle of an optical fiber Michelson interferometer , processing techniques of elastic discs and optical fiber adhesion , 3 ×3 coupler phase demodulation .The expressions of three phase differences of output signals were presented , and the average phase differences were calculated based on the least square method .Simulation data and test data were acquired .Experimental results demonstrate that a fiber acoustic sensor can restore acoustic signal accurately and effectively within designed bandwidth .A fiber acoustic sensor can be used in emergent environments such as severe electro -magnetic situation .The test results verify the feasibility of a fiber acoustic sensor .

关 键 词：传感器技术 3×3耦合器 相位差 解调 光纤 声音传感器 

分 类 号：TP212.44[自动化与计算机技术—检测技术与自动化装置]