混凝+A/O+Fenton+砂滤工艺处理印染废水工程实例  

Application of Coagulation+A/O+Fenton+Sand Filtration Process in Printing and Dyeing Wastewater Treatment

作　　者：易利芳 王震[2] 梅荣武[2] 

机构地区：[1]浙江宏澄环境工程有限公司,313007 [2]浙江省环境保护科学设计研究院,浙江杭州310007

出　　处：《水处理技术》2016年第1期125-127,共3页Technology of Water Treatment

基　　金：重污染行业废水深度处理与回用创新团队建设(2012F20034);苕溪流域农村污染治理技术集成与规模化工程示范(2014ZX07101-012)

摘　　要：采用混凝+A/O+Fenton+砂滤组合工艺处理印染废水。实际运行结果表明,好氧池出水水质较好,COD去除率可达90%以上,经Fenton和砂滤深度处理后的出水水质COD<60 mg/L,BOD5<10 mg/L,COD平均去除率在95%以上,达到企业回用要求,运行费用2.19元/t,运行成本较低。The coagulation＋A/O＋flotation＋Fenton＋sand filtration combined process was used to treat the printing and dyeing wastewater. The results show that the removal efficiency of COD in aerobic tank is up to 90% and more, After the further treatment of Fenton and sand filtration, the COD, BOD5 is less than 60 mg/L and 10mg/L, respectively, the removal efficiency of COD is up to 95%. The effluent can achieve the requirement of enterprise for reclaimed water reuse quality, and the operation is at a reduced cost of 2.19 yuan/t.

关 键 词：印染废水 混凝 A/O Fenton 砂滤 工程设计 

分 类 号：X791[环境科学与工程—环境工程]