碳纤维/层状木材陶瓷的制备与力学性能  

Preparation and mechanical property of carbon fiber/laminated woodceramics

作　　者：余先纯[1] 任思静[1] 郝晓峰[2] 陈新义[2] 刘明辉[2] 孙德林[2] 

机构地区：[1]中南林业科技大学材料科学与工程学院,湖南长沙410004 [2]中南林业科技大学家具与艺术设计学院,湖南长沙410004

出　　处：《材料热处理学报》2016年第1期1-6,共6页Transactions of Materials and Heat Treatment

基　　金：国家自然科学基金(31270611)

摘　　要：为了提升木材陶瓷的力学性能,用液化木材、炭粉和碳纤维等制备增强型层状结构木材陶瓷。探讨了烧结温度、液化木材用量等因素对其结构和力学性能的影响。结果表明,增强型层状木材陶瓷层状结构清晰,摩擦性能良好,且在微观上部分保持了木材天然的孔隙结构特征。同时,增强碳纤维和层状结构的运用能够获得较高强度与较好韧性。当烧结温度为1100℃、炭粉与液化木材质量比为1∶0.75、胶合压力为3 MPa时,其抗弯强度、弹性模量、断裂韧性分别达到了53.90 MPa、2.58 GPa和1.69 MPa·m1/2,与普通木材陶瓷相比均有大幅度提高。In order to improve the mechanical property of woodceramics,reinforced laminated woodceramics was prepared from liquefied wood,carbon powder,carbon fiber and so on. The effects of factors such as sintering temperature and liquefied wood content on the structure and mechanical property of the woodceramics were discussed. The results show that the carbon fiber reinforced laminated woodceramics has not only clearly laminated structure,good friction performance,but also still keeps part of the native pore feature of wood in micro scale. At the same time,the higher strength and better toughness are obtained by the application of reinforced carbon fiber and laminated structure. When the sintering temperature is 1100 ℃,the mass rate of carbon powder and liquefied wood is 1∶ 0. 75 and the glue pressure is 3 MPa,the bending strength,elasticity modulus and fracture toughness can reach up to 53. 90 MPa,2. 58 GPa and 1. 69MPa·m1 /2,respectively,and have great improvement comparing with those of the ordinary woodceramics.

关 键 词：液化木材 木材陶瓷 层状结构 碳纤维增强 

分 类 号：TB332[一般工业技术—材料科学与工程]