检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:池秀文[1] 杨剑锋[1] 郭继琼 何治良[2] 王学梁 高本铭
机构地区:[1]武汉理工大学资源与环境工程学院,湖北武汉430070 [2]西南科技大学环境与资源学院,四川绵阳621010 [3]湖北三宁矿业有限公司,湖北宜昌443000
出 处:《中国矿业》2016年第1期87-91,共5页China Mining Magazine
摘 要:基于对现有能量释放率和采场顶板跨距计算研究的基础上,将能量释放率运用于采场顶板跨距计算,经过理论计算得到对于单个采场和多个采场开采时,能量释放率均能适用,且采场失稳的能量释放主要是由顶板失稳造成的。在此基础上提出适用于采场失稳的面能量释放的概念和计算公式,并推导出顶板极限跨距和安全厚度的计算公式,可知顶板极限跨距和顶板安全厚度与弹性模量、埋深等呈非线性关系,将顶板极限跨距计算公式运用于其他矿山得到验证,并运用于挑水河磷矿开采的顶板极限跨距的计算,指导实际生产,也为顶板极限跨距和安全厚度计算提出新思路和方法。To analysis the existing determined method of the roof span and the applying of energyrelease rate,this paper use energy release rate to calculate span is the innovation,base on the beam modelanalyze the feasibility and put forward the concept of surface energy release which suitable for analysis thestability of mining roof. According to the surface energy release calculation and get the formula of roof limitspan and safety thickness, it s non linear relationship between roof limit span and safety thickness withmodulus of elasticity, buried depth. To proving it by comparing with the practice engineering,and applied tocalculate the stope limit span of the eastern mine area in Tiao-Shui River phosphorite, and the result isreasonable.
分 类 号:TD856[矿业工程—金属矿开采]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33