散装水泥运输车流化过程的仿真分析  

Simulation for Fluidization Process of Bulk Cement Tank Truck

作　　者：黄继刚[1] 李琳[1] 顾信忠[1] 

机构地区：[1]南京航空航天大学金城学院,江苏南京211156

出　　处：《专用汽车》2016年第1期103-106,共4页Special Purpose Vehicle

摘　　要：为分析某散装水泥运输车的流化性能,运用Fluent软件采用双欧拉二相流模型和Gidaspow曳力模型建立了计算流体动力模型,并对罐体内的流场进行了仿真模拟。床层内水泥的体积分数表明流化床属于"鼓泡床"形式,与设计意图相符。罐内流场的速度分布显示流场处于非均匀流状态,且罐内的水泥颗粒并没有完全流态化。A gas-particle computational fluid dynamics（CFD） flow model was developed to simulate the flow behavior in a the three-dimensional fluidized bed to evaluate fluidization quality of bulk cement tank truck. The computational model was based on the EULERIAN two-fluid model. In the modeling, the Gidaspow drag coefficient model was applied to coupling force between the gas-solid two phases. Spatial profiles of the fluid volume traction showed that it was a bubbling type fluidized bed. The simulation result predict fluidization bed was rendered into a nonuniform flow state, and the solid particles were not complete fluidizated.

关 键 词：流化过程 二相流 散装水泥运输车 FLUENT 

分 类 号：U469.65[机械工程—车辆工程]