检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张立辉
机构地区:[1]神东煤炭集团补连塔煤矿,内蒙古鄂尔多斯017209
出 处:《煤矿安全》2016年第1期70-73,共4页Safety in Coal Mines
摘 要:针对硬厚岩层下开采工作面矿压显现程度影响因素多样的情况,采用理论分析、数值模拟与现场实测相结合,建立了不同支撑条件下硬厚岩层岩体内应力表达式,分析了煤层埋深、硬厚岩层厚度及其层位等因素对矿压显现程度的影响,对硬厚岩层层位对工作面矿压显现的影响程度进行研究。研究表明:硬厚岩层的层位对浅埋煤层工作面矿压显现程度影响最大,硬厚岩层厚度次之,煤层埋深的影响较小;硬厚岩层距煤层的距离L与煤层埋深H比值λ<0.35时,工作面来压强烈,当λ>0.35时,工作面来压强度较小。According to the situation of influencing factors variety of mine pressure behavior degree appeared at working face under the hard and thick seams, the combination of theoretical analysis, nmnerical simulation and field measurement, the hard thick layers of rock mass stress expression in different support conditions is set up; the influence of hard thick coal seam buried depth, thickness of strata and its horizon on the rock pressure is analyzed; the influence degree of hard thick strata horizon on the mine pressure behavior is studied. Research shows that the hard thick rock strata for the shallow buried coal seam working face behavior degree to the under- ground pressure has the greatest influence, followed the hard thick strata thickness, buried depth of coal seam of a smaller effect; the pressure is intense at working face when the hard thick layers of coal seam distance and the coal seam buried depth ratio A is less than 0.35 ; when A is more than 0.35, the compressive strength is small.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.143.209.210