铸钢表面镍钛铸渗层的制备及组织分析  

Fabrication and Microstructure of Casting Penetration Composite Layer with Nickel and Titanium on the Surface of Cast Steel

作　　者：王长记 张国赏[1] 魏世忠 潘昆明 

机构地区：[1]河南科技大学材料科学与工程学院,河南洛阳471023 [2]河南省耐磨材料工程技术研究中心,河南洛阳471003

出　　处：《铸造技术》2016年第1期48-50,共3页Foundry Technology

摘　　要：为了提高钢铁表面的耐腐蚀性，采用铸渗技术把镍粉和钛粉铸渗入45钢表面．采用SEM-EDAX和XRD等方法对铸渗层的微观组织进行研究。结果表明，铸渗层和基体冶金结合良好，其厚度为4～5mm。纯镍铸渗层主要由理-Fe和Fe3Ni2组成，钛镍铸渗层由α-Fe、Fe0.64Ni0.36和TiC组成，且TiC在晶界处富集。In order to improve the corrosion resistance of the steel surface, the cast-infiltrated layer with nickel and titanium on the surface of 45# steel was achieved by infiltration casting technology. The microstructure of the cast-infiltrated layer was characterized by scanning electron microscopy equipped with an energy dispersive X-ray spectroscopy （EDS） and X-ray diffractometry （XRD）. The results show that cast-infiltrated layer can metallurgically bond with the substrate. The thickness of the cast-infiltrated layer is 4-5 mm. Pure nickel cast-infiltrated layer is mainly composed of α-Fe and Fe3Ni2. The nickel and titanium cast-infiltrated layer is mainly composed of α-Fe, Fe0.64Ni0.36 and TiC, and TiC enrich in the grain boundaries.

关 键 词：铸渗 镍钛铸渗层 工艺参数 

分 类 号：TG174.4[金属学及工艺—金属表面处理]