基于级联结构的四线偏振模掺铒光纤放大器设计  

Design of Cascaded Erbium-Doped Fiber Amplifier Supporting Four Linearly Polarized Modes

在线阅读下载全文

作  者:秦祖军[1,2,3] 袁明[1,3] 张文涛[1,3] 叶松[1,3] 熊显名[1,3] 

机构地区:[1]桂林电子科技大学电子工程与自动化学院,广西桂林541004 [2]广西信息科学实验中心,广西桂林541004 [3]广西自动检测技术与仪器重点实验室,广西桂林541004

出  处:《激光与光电子学进展》2016年第1期76-83,共8页Laser & Optoelectronics Progress

基  金:广西自然科学基金(2013GXNSFBA019269;2014GXNSFAA118389;2013GXNSFDA019002;2014GXNSFGA118003);广西信息科学实验中心;广西自动检测技术与仪器重点实验室资助项目

摘  要:阶梯式掺杂和多环式掺杂设计的掺铒光纤(EDFs)结构复杂,采用改进化学气相沉积法(MCVD)制备困难。为此,将两段铒离子分别为中心掺杂和环形掺杂的掺铒光纤级联构成四线偏振模信号光放大器。该结构放大器使中心模式信号光(LP_(01)模和LP_(02)模)和离心模式信号光(LP_(11)模和LP_(21)模)分别在中心掺杂铒光纤和环形掺杂铒光纤中获得主要增益。基于一种改进遗传算法(GA),对该放大器两段掺铒光纤的长度和铒离子掺杂半径进行优化。结果显示,仅用270m W LP_(11)模抽运光对该级联结构放大器进行抽运,四线偏振模信号光可获得20dB的平均增益,且模式相关增益(DMG)不超过3.5dB。Erbium-doped fibers(EDFs) with multi-step ormulti-annular and multi-level doping profiles are difficult to be fabricated by modified chemical vapor deposition (MCVD). A cascaded amplifier, based on two EDFs with a central doping profile and an annular doping profile, is proposed to equalize modal gain among four linearly polarized modes. In the amplifier, the centered- and off-centered modes are mainly amplified in the central- and annulardoped EDFs, respectively. An improved genetic algorithm (GA) is employed to optimize the optimal fiber length and doping radius in each EDF. Results show that an average modal gain around 20 dB with differential modal gain (DMG) between signal modes being less than 3.5 dB is achieved for a pure LP11 pump beam.

关 键 词:光纤光学 级联结构 模式增益均衡 掺铒光纤放大器 

分 类 号:O436[机械工程—光学工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象