WJ1210颚式破碎机动颚强度仿真分析  

Finite Element Analysis of Moving Jaw of WJ1210 Jaw Crusher

作　　者：姜丹丹[1] 刘永财[2] 刘国祥 金星星 舒阳[1] 鲍益东[1] 

机构地区：[1]南京航空航天大学机电学院,江苏南京210016 [2]曲靖师范学院数学与信息科学学院,云南曲靖655011 [3]浙江武精机器制造有限公司,浙江金华321200

出　　处：《机械制造与自动化》2016年第1期136-138,共3页Machine Building & Automation

摘　　要：针对WJ1210复杂摆动颚式破碎机的动颚部分,计算出了动颚齿板在工作过程中所受的最大破碎力值,并根据实际情况确定仿真分析中的受力分布情况。采用三维绘图软件CATIA建立几何模型作为有限元分析模型,再通过ABAQUS软件对其进行有限元分析计算,得到动颚的应力分布情况,以此为依据提出结构改进的建议,从而减轻质量降低成本,提高经济效益。For the moving jaw of WJ1210 complex swing jaw crusher, the biggest crushing force on the moving jaw in working process is calculated, and the force distribution in the simulation analysis is determined based on the real situation. A geometrical model is built in a three dimensional drawing software CATIA, then it is used to do e simulation analysis in ABAQUS in order to get the stress distribution on the moving jaw, and based on these results some structural improvements are presented for reducing weight and cost, increasing economic efficiency.

关 键 词：颚式破碎机 动颚 有限元分析 

分 类 号：TP391.9[自动化与计算机技术—计算机应用技术]