压电式摆动圆柱形偶极发射换能器优化研究  

Studies on piezoelectric cylindrical transducer optimization for dipole acoustic logging

作　　者：周吟秋[1] 王秀明[1] 辛鹏来[1] 戴郁郁[1] 

机构地区：[1]中国科学院声学研究所声场声信息国家重点实验室,北京100190

出　　处：《应用声学》2016年第1期1-7,共7页Journal of Applied Acoustics

基　　金：国家自然科学基金项目(11134011;11404370)

摘　　要：为了实现偶极信号有效辐射,获得足够高的信噪比,全面分析弯曲波频散,本文提出了一种新型的频带范围为0.5–5 k Hz的压电式摆动圆柱形偶极声波测井换能器,并采用有限元方法对其进行了模拟和优化设计。此外,论文还对换能器进行了实验样机制作和实验测量,将实验测量与数值模拟结果进行了对比。研究表明,提出的新型偶极声波换能器比传统换能器具有更高的发射灵敏度,尤其是在低频响应范围。本文为新型偶极声波测井换能器的研发工作奠定了基础。In order to realize the effective radiation of dipole signal, enhance the signal to noise ratio and analyze the dispersion of flexural wave, a novel piezoelectric dipole transducer for acoustic logging in the frequency range of 0.5-5 kHz is proposed, and the transducer is simulated and optimized by adopting the finite element method in this article. Moreover, the transducer is fabricated and tested to compare with the numerical results. Our studies show that the proposed dipole transducer has higher transmitting sensitivities than commonly used ones, especially in low frequency responses. This work lays a foundation for the new development of such transducer in dipole acoustic logging.

关 键 词：换能器数值优化 压电弯曲三叠片 声波测井 圆柱形壳体 

分 类 号：P631.53[天文地球—地质矿产勘探]