大规格2219铝合金圆铸锭锻造开坯与质量分析  

Analysis on Process and Quality of Forging-cogging for Large Size 2219 Aluminium Alloy Round Ingot

作　　者：张文学[1] 徐坤和 阳代军[1] 张国方 丁鹏飞[1] 王恒强[1] 刘东[3] 

机构地区：[1]首都航天机械公司,北京100076 [2]江苏国光重型机械有限公司,江阴214444 [3]西北工业大学,西安710072

出　　处：《航天制造技术》2015年第6期7-10,14,共5页Aerospace Manufacturing Technology

摘　　要：大规格2219铝合金圆铸锭存在组织不均匀、晶粒粗大以及大量粗大共晶化合物等铸造缺陷,同时锻造过程操纵性差、变形均匀性控制难度大。通过采用多向锻造、冲孔和马架扩孔的开坯工艺,加大了铸锭的变形程度,有效地细化了晶粒,粗大的共晶化合物也得到了破碎,提高了微观组织的均匀性,改善了材料的力学性能,实现了大规格2219铝合金环轧坯料的"形-性"协同控制。For the large size aluminium alloy ingot, a lot of casting defects, such as the unevenly distribution of microstructure, coarse grain size, eutectic compounds and so on, existed in it, and it is difficult to control the forging process and the deformation uniformity. By adopting the forging-cogging process of multiple forging, punching and broaching with frame, the deformation degree of ingot is enhanced, the size of grains is refined, and the coarse eutectic compound is also broke down. The distributed uniformity of microstructure and mechanical properties of the 2219 aluminium alloy are improved. Then the cooperative control of shape and property of large specification 2219 aluminium alloy ring blank is realized.

关 键 词：大规格圆铸锭 2219铝合金 多向锻造 力学性能 

分 类 号：V46[航空宇航科学与技术—航空宇航制造工程]