一种三元疏水缔合聚合物的合成及性质分析  

SYNTHESIS OF A HYDROPHOBIC ASSOCIATED TERPOLYMERS AND ITS SOLUTION PROPERTIES

作　　者：马喜平[1] 谢京豫 代磊阳 张锋 曹洪贵 董江洁 秦山[4] 

机构地区：[1]西南石油大学化学化工学院,四川成都610500 [2]中海石油(中国)有限公司天津分公司,天津300452 [3]新疆油田采气一厂工艺所,新疆克拉玛依834000 [4]西南石油大学石油工程学院,四川成都610500

出　　处：《精细石油化工》2016年第1期1-5,共5页Speciality Petrochemicals

摘　　要：采用水溶液聚合法,以丙烯酰胺(AM)、丙烯酸(AA)为单体,甲基丙烯酰氧乙基二甲基十六烷基溴化铵(C_(16)DM)为疏水单体合成了一种两性离子聚合物。通过单因素实验确定了聚合反应的较佳条件是:单体总质量分数25%、体系pH值8、n(AM):n(AA):n(C_(16)DM)=77.7:21:1.3、引发剂(n(APS):n(SS)=1.2:1)用量为0.2%、反应温度60℃、反应时间5h。实验表明:聚合物溶液的临界缔合浓度是2g/L;1.0%聚合物溶液黏度在90℃时为62 mPa·s,黏度保留率为64.6%;0.8%聚合物溶液在NaCl浓度为0.6 mol/L时黏度为40 mPa·s,黏度保留率为47.6%;在1 70 s^(-1)的剪切速率下,经过1200 s的剪切后,0.8%的聚合物溶液的黏度稳定在70 mPa·s,黏度保留率为82.3%。This paper introduced a new hydrophobic associated polymer through aqueous solution polymerization.The monomers are acrylamide（AM）,acrylic acid（AA） and hydrophobic monomer（C_（16）DM）.The optimum conditions determined by single factor analysis are that temperature of reaction is60℃,monomer mass is 25%,the ratio among n（AM）：n（AA）：n（C_（16）DM） is 77.7：21：1.3,dosage of initiator is 0.2%,pH is 8,reaction time is 5h.The structure of the polymer is characterized by means of ~1H NMR and infrared spectrum.The viscosity of 1.0%polymer solution was 62 mPa·s,the viscosity retention ratio was 64.6%at 90℃;the viscosity of the polymer solution in 0.6 mol/L NaCl brine was 40 mPa·s,the viscosity retention ratio was 47.6%;the viscosity of the polymer solution sheared at 170 s^（-1） for 1200 s was 70 mPa·s,the viscosity retention ratio was 82.3%.The critical associating mass concentration of the copolymer solution is 2 g/L.Through the test,the polymer solution has shown good performance that it can resist high temperature and high dosage salt,also it can resist high shear.

关 键 词：丙烯酰胺 丙烯酸 单因素法 疏水缔合聚合物 

分 类 号：TE39[石油与天然气工程—油气田开发工程]