浅埋中硬顶板下大采高区段煤柱合理宽度及支护技术研究  

Research on the reasonable section coal pillars width and support technology with medium hard roof and shallow-seam mining

作　　者：杨惠斌[1,2] 韩磊[2] 

机构地区：[1]中国矿业大学(北京),北京100083 [2]霍州煤电集团有限责任公司三交河煤矿,山西临汾416000

出　　处：《山东煤炭科技》2016年第2期35-37,40,共4页Shandong Coal Science and Technology

摘　　要：通过采用理论分析及数值模拟试验的方法,对比不同留设煤柱条件下的巷道支护效果,分析得出三交河煤矿2-506大采高工作面回采后煤柱及采空区侧支撑压力的分布规律,从而确定最佳的煤柱留设尺寸。同时,采用高预应力锚杆支护的技术,被支护巷道能够保持了整体完整性且支护结构体现了良好的主动承载能力。By using the methods of theoretical analysis and numerical simulation, compared the roadway supporting effect when the design coal pillar width are different, analyzed the abutment pressure distribution law in coal pillar and gob side after mined in Sanjiaohe coal mine 2-506 large mining height working face, so as to determine the optimum coal pillar size. At the same time, using the technology of high pre-stress bolt supporting can maintain the roadway integrity, the support structure reflected the good and active bearing capacity. The control effect is remarkable, which greatly improves the recovery rate of coal, and improves the production efficiency of coal mine.

关 键 词：煤柱留设 数值模拟 锚杆支护 

分 类 号：TD355[矿业工程—矿井建设]