4300mm轧机支承辊新辊型的设计与研究  

Design and research on new contour of back-up roll for 4300 mm wide plate mill

作　　者：陈显望 孙登月[1] 许石民[1] 

机构地区：[1]燕山大学国家冷轧板带装备及工艺工程技术研究中心,河北秦皇岛066004

出　　处：《锻压技术》2016年第2期98-103,共6页Forging & Stamping Technology

基　　金：河北省自然科学基金资助项目(E2010001155)

摘　　要：利用赫兹理论分析了支承辊和工作辊接触区的应力状态,结合现有的几种辊型倒角曲线,依据辊间接触应力均匀分布的原则提出了一种新的支承辊辊型倒角。利用ABAQUS有限元软件建立三维轧制模型,通过改变轧制力等参数对不同辊型倒角下支承辊的应力场、工作辊挠度以及钢板的厚度差做了分析和对比;结合有限元分析结果,利用FE-SAFE疲劳分析软件,并采用Brown-Miller疲劳损伤公式估算不同辊型倒角下支承辊的疲劳寿命,证明了新辊型对提高支承辊疲劳寿命的有效性。Based on the Hertz theory, the stress state between back-up roll and work roll was analyzed. Combining with several existing back-up roll contour curves, a new back-up roll contour chamfering in accordance with the uniform distribution of contact stress was proposed. A 3-D finite element rolling model was also established by the finite element software ABAQUS, and the stress field of the back-up roll, deflection of working roll and thickness difference of steel plate under the different roll contour chamfering were analyzed and com- pared by changing the rolling parameters. Combined with the results of finite element analysis, the fatigue life of the back-up roll with the different roll contour chamfering was predicted by FE - SAFE fatigue analysis software and the fatigue damage criterion of Brown - Miller. It is proved that the new contour back-up roll is very effective for improving the fatigue life of back-up roll.

关 键 词：支承辊辊型 应力场 疲劳寿命 板形 

分 类 号：TG333.17[金属学及工艺—金属压力加工]