一种基于HCPL-316J的IGBT驱动电路设计  

A design of IGBT drive circuit based on HCPL-316J

作　　者：樊明龙[1] 郑桂标 

机构地区：[1]扬州工业职业技术学院,江苏扬州225127 [2]阳光电源股份有限公司,安徽合肥230088

出　　处：《电子设计工程》2016年第2期107-109,共3页Electronic Design Engineering

基　　金：中央财政支持的职业教育实训基地"自动化综合控制实训基地"建设项目(苏教财[2012]177号)

摘　　要：在较复杂的变流系统中,主控系统的延滞会影响IGBT模块故障保护的时效性,造成保护失败。针对这种情况,本文采用光耦驱动芯片HCPL-316J和DSP芯片设计了一种IGBT驱动电路,当光耦芯片故障信号发出后立即封锁IGBT驱动信号,完全消除了主控程序运行时长对故障保护的影响。通过模拟过流实验和实际应用表明,本设计故障保护响应迅速,运行稳定可靠。In more complex converter system, delay of the main control system will affect the efficiency of the IGBT fault protection. In view of this situation, the HCPL-316 J optocoupler and DSP were combined to compose a IGBT drive circuit. The IGBT drive signal was blockaded immediately when the optocoupler fault signal was issued. It completely eliminated the effects from the running time of the master program. Simulation over-current experiments and practical applications showed this design had the rapid response to fault protection, and stable and reliable operation.

关 键 词：HCPL-316J IGBT驱动电路 故障保护 电路设计 

分 类 号：TN409[电子电信—微电子学与固体电子学]