CoMo/HZSM-5催化剂上的烯烃芳构化反应研究  

Aromatization reaction of olefins over Co-Mo/HZSM-5 catalyst

作　　者：孔飞飞[1] 王海彦[1] 魏民[1] 王钰佳[1] 杨占旭[1] 

机构地区：[1]辽宁石油化工大学石油化工学院,辽宁抚顺113001

出　　处：《现代化工》2016年第2期50-54,共5页Modern Chemical Industry

基　　金：辽宁省自然基金资助项目(201202126);国家自然科学基金资助项目(21401093)

摘　　要：采用0.2 mol/L Na OH溶液对硅铝摩尔比为50、80、150的HZSM-5分子筛进行碱处理,并采用XRD、BET、NH_3-TPD和SEM等方法对其进行表征,研究了硅铝摩尔比为50、80、150的HZSM-5分子筛经碱处理制备Co-Mo/HZSM-5催化剂的烯烃芳构化反应。结果表明:碱处理后,HZSM-5分子筛具有较大的比表面积、平均孔径和介孔体积。以FCC汽油为原料时,CoMo/HZSM-5(50-0.2)在烯烃芳构化反应中烯烃转化率最高,且芳烃收率较高。在实验室自制小型固定床反应器上探究不同工艺条件下Co Mo/HZSM-5(50-0.2)催化剂对烯烃芳构化反应的影响。结果表明:反应温度为410℃,反应压力为1.0 MPa,反应空速为1.0 h-1时,Co Mo/HZSM-5(50-0.2)催化剂烯烃转化率最高,为93.5%,芳烃收率最高,为31.5%。ZSM-5 zeolites with different SiOJA12 O3 ratios（50,80,150）are treated by 0. 2 mol/L NaOH solution. The HZSM-5 zeolites before and after alkali treatment are characterized by XRD, BET, NH3-TPD and SEM techniques. The results show that HZSM-5 （50 -0. 2 ） has larger specific surface area, pore size and mesoporous volume. Its framework is stable. With the FCC gasoline as the raw material, the aromatization reaction of olefins catalyzed by Co-Mo/ HZSM-5 which is prepared by alkali treated HZSM-5 zeolites with micro-and mesoporous is studied. The results show that the conversion of olefin over Co-Mo/HZSM-5 （50 -0. 2） is the highest and the aromatics yield is higher. The effect of process conditions on the olefin aromatization reaction over Co-Mo/HZSM-5 （50 - 0. 2） in a small fixed bed reactor is also investigated. The conversion of olefin and the aromatic yield over Co-Mo/HZSM-5 （50 -0. 2） can reach 93.5% and 31.5% ,respectively,under the following conditions：410℃ of reaction temperature, 1.0 MPa of reaction pressure and 1.0 h-1 of reaction velocity.

关 键 词：FCC汽油 降烯烃 碱处理 ZSM-5分子筛 

分 类 号：TQ519[化学工程]