基于横向力系数的汽车急转防侧翻车速计算模型与仿真  

Speed calculation model and simulation of rollover prevention in condition of extreme turn based on lateral force coefficient

作　　者：范李[1,2] 李刚炎[1] 陈冉[1] 梁浩彤[1] 杨键[2] 曹林伟 孟利航 

机构地区：[1]武汉理工大学机电工程学院,武汉430070 [2]空军空降兵学院,桂林541003

出　　处：《农业工程学报》2016年第3期41-47,共7页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家自然科学基金(51305313);教育部高校博士点专项科研基金(20130143110004);湖北省自然科学基金(2015CFB567;2013CFB336)

摘　　要：针对汽车转向行驶时常因车速过快而引发侧翻事故这一问题,通过建立车辆转向行驶的力学模型,分别对刚性车体和考虑悬架作用车体在急转工况下的受力状况进行分析;在分析车辆转向时横向载荷转移、悬架运动等因素对横向力系数影响的基础上,将横向力系数的计算方法进行改进;根据横向力系数与车速间的关系,建立了基于横向力系数的汽车急转工况防侧翻临界安全车速计算模型;选用某型商用车结构参数为例,通过Matlab软件仿真的方法将所建立模型与其他4种弯道安全车速计算模型进行对比分析,该模型所得临界安全车速处于其他4种车速模型所得结果的区间内;同时,采用车辆动力学软件Truck Sim进行不同转弯半径下的车辆转向侧翻仿真对该模型进行验证,模型所得安全车速值比Truck Sim软件仿真所得侧翻临界车速值约小10%。该研究为急转工况下车辆的侧翻评价以及车辆转向行驶的主动安全控制提供了参考。The problem of lateral rollover due to excessive speed occurs easily in the process that the vehicle is turning, especially under the condition of vehicle extreme turn. In traditional researches on vehicle roller prevention, rollover threshold is calculated by vehicle tread, height of centroid and other structure parameters. The side acceleration, which is caused when vehicles are turning, is controlled on the basis of rollover thresholds to prevent rollover. However, sometimes the speed calculated by rollover threshold is very high. The lateral load transfer and suspension movement become larger because of sharp turn in actual turning, which can lead to rollover although the speed is under the calculated critical velocity. To solve the problem, the safety speed calculation model of rollover prevention is built, which is under the condition of vehicle extreme turn based on lateral force coefficient. First of all, combined with the expression of lateral force coefficient, and according to the influence of lateral force coefficient on the driving stability in the process of turning, the feasibility of characterizing the safety speed of the vehicle for rollover prevention under vehicle extreme turn condition by lateral force coefficient is analyzed. Secondly, the rigid body dynamic model of vehicle during the turning and the dynamic model with consideration of the suspension of vehicle are established. Through the comparison between the models above, the stress of the vehicle under the condition of extreme tum driving is analyzed. Thirdly, in view of the dynamic models above, the calculation method of traditional lateral force coefficient is optimized. Fourthly, according to the relationship between lateral force coefficient and vehicle speed, the calculation model of the safety speed of the vehicle based on lateral force coefficient is established, which is for rollover prevention under extreme turn driving conditions. Finally, to verify the accuracy and reliability of the model, taking the structure parameters of

关 键 词：车辆 计算机仿真 模型 横向力系数 急转工况 

分 类 号：TH122[机械工程—机械设计及理论]