检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张根烜[1] 王璐[1] 张先锋[1] 洪大良[1]
机构地区:[1]中国电子科技集团公司第三十八研究所,合肥230088
出 处:《制冷学报》2016年第1期90-94,共5页Journal of Refrigeration
基 金:国家安全重大基础研究项目(613164030102)资助项目~~
摘 要:两相热虹吸回路由于较高的散热性能在高功率电子设备冷却领域有较好的应用前景。为了解决四通道数字阵列模块的冷却问题,本文设计了一套两相闭式热虹吸回路冷却系统样机并对系统启动特性、充液量和工作倾角对系统散热性能的影响进行了实验研究。研究结果表明,样机系统结构及散热性能满足指标要求,启动性能和工作性能良好。此外,该系统对热耗1600 W、局部热流密度接近100 W/cm^2的组件的冷却效果良好。Two phase thermosyphon loop has a good potential of application in cooling of electronic equipment with high power source because of its relatively high efficiency of heat dissipation performance. To solve the cooling problem of a DAM with four channels, this pa- per designs a prototype of two phase closed thermosyphon cooling system. The starting characteristic of the system, the influence of the refrigerant charge and working inclination angle on its heat dissipation performance are investigated experimentally in this paper. The results show that the structure and heat dissipation performance of the system match the requirement. It also can be found that the starting charac-teristic and the working performance of the system are very good. In addition, a 1600 W module with local heat flux near 100 W/cm^2 is cooled very well by the system in this paper.
关 键 词:热虹吸回路 冷却系统 电子设备 实验研究 R134A
分 类 号:TK124[动力工程及工程热物理—工程热物理] TB611[动力工程及工程热物理—热能工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3