TB8钛合金双级时效过程中的组织演变及时效响应（英文）  

Microstructure evolution and aging response during duplex aging of TB8 titanium alloy

作　　者：徐铁伟[1,2] 李金山[1] 张丰收[1,2] 刘向宏[1,2] 冯勇[1,2] 薛祥义[1] 

机构地区：[1]西北工业大学材料学院,陕西西安710072 [2]西部超导材料科技股份有限公司,陕西西安710018

出　　处：《材料热处理学报》2016年第2期58-64,共7页Transactions of Materials and Heat Treatment

摘　　要：利用场发射扫描电镜(FE-SEM),X射线衍射仪(XRD),差热分析仪(DSC)等测试手段和分析方法,比较系统地研究了TB8钛合金的双级时效过程中组织演变及强化响应行为。结果表明:TB8钛合金在400℃/1 h预时效时β基体析出ω相,而在随后进行的500℃终级时效时ω相转变为α相。随着终级时效的持续,合金的硬度明显提高,合金析出α相的数量不断增加,尤其(101)α的衍射峰强度明显增强。经FE-SEM、DSC和XRD的结果分析发现,预时效处理产生了较多的细小弥散析出相,成为α沉淀相的转变基础,终级时效在5.5 h时基本完成相转变,而双级时效有利于减小析出α相的尺寸。Microstructure evolution and hardening response behavior during duplex aging of TB8 titanium alloy were investigated by field emission scanning electron microscopy （FE-SEM） , X-ray diffraction （XRD） , differential scanning calorimeter （ DSC）. Results show that co precipitates appeared when the alloy is treated by pre-aging at 400 ℃ for 1 h, and these precipitates transform from co to a phase in the subsequent final-aging process at 500 ℃. Hardness of the samples increases obviously in the process of final-aging treatment, and enhanced intensity of （ 101 ） α peak suggested amount of α phase increases synchronistically. Results of FE-SEM, DSC and XRD analysis find that pre-aging treatment generated lots of to precipitates, which supplied the basis of precipitating of fine a phase, and the transformation completion nearly needed about 5.5 h final-aging treatment at 500 ℃.

关 键 词：双级时效 组织演变 钛合金 时效响应 

分 类 号：TG146.23[一般工业技术—材料科学与工程]