车用柴油机颗粒物传感器的CAN智能接口设计  

Design on CAN intelligent interface sensor for diesel particulate matter for vehicle

作　　者：汤东[1] 张明[1] 徐亚超[1] 

机构地区：[1]江苏大学汽车与交通工程学院,江苏镇江212013

出　　处：《中国农机化学报》2016年第3期136-139,176,共5页Journal of Chinese Agricultural Mechanization

基　　金：江苏省国际合作项目(BZ2012025);内燃机燃烧学国家重点实验室开放课题(K2014-9)

摘　　要：漏电流式颗粒物传感器目前是一种新型检测汽车废气颗粒物含量装置。它首先将颗粒物浓度转化为nA级电流,再通过采集系统将电流转换为电压,通过ADS8364转化为数字量;因为在同样浓度的PM2.5颗粒物,输出电流受温度影响,此传感器中增加了温度检测电路,通过温度对PM2.5的浓度进行调正,调正后的值由CAN接口通过收发器发送到CAN总线,供其它装置使用。传感器使用一段时间后,会受污染影响测量精度,传感器中设计了加热电路,对污染物加热,使其燃烧净化,以保证测量精度。The leakage flow particle sensor is a new detecting automobile exhaust particles content device. The particle concentration is converted to nA current, and then translate current into a voltage by the acquisition system, and eonverse to digital quantity by ADS8364; because of the same concentration of PM2.5 particles, the output current is affected by temperature, increasing the temperature detection circuit of this sensor is adjusted by temperature, concentration of PM2.5, adjust after the values from the CAN interrace by the transceiver to the CAN bus, used for other devices. After a period of time, it will be affected by pollution affects the measurement accuracy, sensor design heating circuit for heating, pollutants, combustion purification, in order to ensure the measurement precision.

关 键 词：ADS8364 CAN总线 S3C2410 颗粒物传感器 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置]