支持多种温度传感器的多通道低温测量系统的设计  

Multi-channel and Multi-sensor Low Temperature Measurement System

作　　者：崔奎[1] 胡纯栋[1] 谢远来[1] 程斌[1] 马长城[1] 杨思浩 邑伟 

机构地区：[1]中国科学院等离子体物理研究所,合肥230031

出　　处：《计算机测量与控制》2016年第2期38-41,共4页Computer Measurement &Control

基　　金：国家磁约束核聚变能发展研究专项项目(2013GB101000)

摘　　要：中性束注入(neutral beam injector,NBI)系统的低温泵上必须设置一组温度测量点以监控其工作状态;为满足NBI温度测量需求,设计了一种支持多种温度传感器的多通道低温测量系统;系统采用24位Σ-Δ模数转换(analog-to-digital converter,ADC)芯片AD7193执行模数转换,采用控制器STM32F103ZET6控制设定恒流源、切换测量通道、ADC、以太网通信、串口通信、温度数据处理以及其他控制电路;该温度测量电路的设计可以用于由恒流源驱动的四线制低温温度测量领域。A set of temperature measurement points must be arranged on the cryopumps of neutral beam injector （NBI） for the purpose of monitoring their status. A kind of multi channel low temperature measurement system is designed to meet the demand of NBI which could support multiple temperature sensors. 24 hit sigma-delta （∑-△） analog to-digital converter （ADC） AD7193 is adopted to perform analog-to- digital conversion. An ARM processor STM32F103ZET6 is used for setting the value of constant current source, switching difierent chan- nels, controlling ADC, sending the data to the Ethernet by using TCP/IP protocol, RS232 data communication, data processing and control- ling some other parts of the circuit. The circuit can be applied in low temperature measurement field which adopts four-wire temperature sen- sors driven by constant currents.

关 键 词：低温测量电路 多通道 多种传感器 电流源 低温泵 

分 类 号：TH811[机械工程—仪器科学与技术] TP212[机械工程—精密仪器及机械]