从提钪浸出渣中回收铌的研究  

Study on Recovery of Niobium from Scandium Bearing Acid-Leaching-Residue

作　　者：乔晓明[1,2] 李梅[1,2,3] 张栋梁[3] 高凯[3] 耿彦华 朱永涛[2,4] 

机构地区：[1]内蒙古科技大学材料与冶金学院,内蒙古包头014010 [2]内蒙古自治区稀土现代冶金新技术与应用重点实验室,内蒙古包头014010 [3]北京化工大学材料科学与工程学院,北京100029 [4]内蒙古科技大学矿业研究院,内蒙古包头014010

出　　处：《有色金属（冶炼部分）》2016年第3期44-47,共4页Nonferrous Metals（Extractive Metallurgy)

基　　金："十二五"国家科技支撑计划项目(2012BAE01B01);国家高技术研究发展计划(863计划)项目(2012AA061904);内蒙古自然科学基金重大项目(2014ZD04)

摘　　要：采用氟化焙烧—硫酸浸出工艺从提钪后的浸出渣中回收铌,研究焙烧温度、焙烧时间、氟化氢铵用量对脱硅效果和铌富集效果的影响,以及硫酸浓度、硫酸用量、浸出温度和浸出时间对铌浸出率的影响。结果表明,焙烧温度为200℃,焙烧时间为2.5h,矿盐比为1∶1.2时,硅脱除率达到95%以上,渣中铌品位富集到2.1%左右;硫酸浓度为12mol/L,浸出时间2h,浸出温度为80℃,液固比为15∶1时,铌的浸出率达到80%。Niobium was recovered from scandium bearing acid-leaching-residue by fluoride roasting and sulfuric acid leaching. The effects of roasting temperature, roasting time, and dosage of ammonium bifluoride on desilication and niobium enrichment were investigated. The effects of sulfuric acid concentration, dosage of sulfuric acid, leaching temperature, and leaching time on niobium leaching rate were also studied. The results show that desiliconization rate is 95% and niobium concentrate grade in slag is 2.1% under the calcination conditions including temperature of 200 ℃, roasting time of 2.5 h, and mineral salt ratio niobium is 800/6o under the leaching conditions including sulfuric acid concentration h, leaching temperature of 80 ℃, and ratio of liquid to solid of 15 ： 1. of 1 ： 1. 2. Leaching rate of of 12 tool/L, leaching time of 2

关 键 词：酸浸渣 氟化氢铵 铌 硫酸浸出 

分 类 号：TF841.6[冶金工程—有色金属冶金]