三元复合驱分质注入工具的结构优化  

Structure optimization for different medium injection tools for ackaline surfactant polymer(ASP) flooding

作　　者：张书进[1] 刘崇江[1] 蔡萌[1] 杨志刚[1] 梁福民[1] 

机构地区：[1]中国石油大庆油田有限责任公司采油工程研究院

出　　处：《石油钻采工艺》2016年第1期114-117,共4页Oil Drilling & Production Technology

基　　金：国家科技重大专项"大庆长垣特高含水油田提高采收率示范工程"(编号:2011ZX05052)

摘　　要：三元复合驱分质注入工具的结构参数较多,多因素多水平的问题往往会造成结构参数难以确定。通过数值模拟和正交实验设计相结合的方法,分析了5因素4水平、共计16组的分质注入工具结构对平均应变速率和压力损失的影响;并利用极差和方差分析方法对影响结果进行了分析,确定出了最优分质注入工具结构参数,即扩散角尺寸1 mm、扩散角45°、圆柱段直径?4 mm、圆柱段长度2 mm、收缩段半径?10 mm。该优化研究为工具结构优化设计提供了技术指导。There are a number of structure parameters of different medium injection tools for ASP lfooding. The problem of multi-factor and multi-level tend to cause dififculty in determining the structural parameters. By the method of combining numerical simulation with orthogonal experimental design, analysis was conducted to the effect of 16 sets of different medium injection tool structures with 5 factors and 4 levels on average strain velocity and pressure loss; also, range analysis and variance analysis were conducted to analyze the consequences and ifnalized the optimum parameters of different medium injection tool structures, that is, size of divergence angle 1mm, divergence angle 45°, diameter of cylindrical section ?4 mm, length of cylindrical section 2 mm, radius of contraction section, ?10 mm. This optimization research provides technical guidance for the optimization design of tool structure.

关 键 词：三元复合驱 分质注入工具 结构优化 幂律流体 数值模拟 正交实验 

分 类 号：TE934.9[石油与天然气工程—石油机械设备]