基于CAN总线的远程温度采集系统设计  

Design of Distributed Remote Temperature Acquisition System Based on CAN Bus

作　　者：程江涛[1] 董秀萍[1] 

机构地区：[1]北京工商大学材料与机械工程学院,北京100048

出　　处：《机电工程技术》2016年第2期14-18,共5页Mechanical & Electrical Engineering Technology

摘　　要：设计了一种基于CAN总线的远程温度采集系统,主要由一个主监视器和多个温度采集点组成。通过CAN控制器SJA1000和驱动器82C250读取总线信号并向总线发送命令,将数字温度传感器采集到的温度信号,通过单总线传给STC89C52RC单片机,通过CAN控制器和驱动器将信号传至主监视器,使用LCD1602液晶显示器实现数据显示。This article has designed one kind based on the CAN bus＇ s remote temperature gathering system,which is mainly composed by a primary monitor, and multiple-temperature gathering point. Completes reading of the bus signals as well as sending a command to the bus by the CAN controller SJA1000 and drive 82C250, the scene end through 18B20 digital temperature sensor gathering temperature signal, passes on through a single bus to STC89C52 RC microcontroller, then passes on through CAN controller and the driver to the main monitor, uses the LCD1602 liquid-crystal display to realize the data demonstration.

关 键 词：CAN总线 温度采集 SJA1000控制器 82C250驱动器 STC89C52RC单片机 

分 类 号：TP277[自动化与计算机技术—检测技术与自动化装置]