检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨永青[1] 肖静[1] 刘会栋 黄端平[1] 徐庆[1]
机构地区:[1]武汉理工大学材料科学与工程学院,武汉430070
出 处:《现代技术陶瓷》2016年第1期41-46,共6页Advanced Ceramics
基 金:国家自然科学基金(51572204);武汉市科技局国际合作项目(2014030709020315)
摘 要:本文探讨了采用离子半径较小的Sm^(3+)代替La_(0.3)Sr_(0.7)Fe_(1-x)Cr_xO_(3-δ)中的La^(3+)以降低这类阴极材料热膨胀系数的可行性。采用甘氨酸-硝酸盐法合成了Sm_(1-x)Sr_xFe_(0.7)Cr_(0.3)O_(3-δ)(x=0.5~0.7)粉体,在1350°C下烧结得到陶瓷样品。测试结果表明,陶瓷样品的相对密度均达到95%以上;在700°C下,陶瓷样品的电导率为~44 S×cm^(-1);在40°C^1000°C温度范围内,陶瓷样品的平均热膨胀系数为12.8×10^(-6)K^(-1)~14.1×10^(-6)K^(-1)。The feasibility of replacing La^(3+) in La_0.3Sr_(0.7)Fe_(1-x)Cr_xO(3-δ) by Sm^(3+)to decrease the thermal expansion coefficients was studied. Sm1-xSrxFe0.7Cr0.3O3-δ(x = 0.5 ~ 0.7) powders were synthesized by using a glycine-nitrate process and the ceramic specimens were prepared by sintering at 1350°C. The results indicated that the ceramic specimens attained over 95% of their theoretical densities. The electrical conductivities of the specimens at 700°C were around 44 S×cm^(-1). The thermal expansion coefficients of the specimens averaged over the temperature range of 40°C ~ 1000°C were in the range of 12.8 × 10^(-6)K^(-1) ~ 14.1 × 10^(-6)K^(-1).
分 类 号:TB34[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.74.181