检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱俊阳[1] 陈恒[1] 刘瑞祥 尹长霞 刘福田[1]
机构地区:[1]济南大学材料科学与工程学院,济南250022 [2]山东工业陶瓷设计研究院有限公司,山东淄博255031 [3]淄博高新技术产业开发区先进陶瓷研究院,山东淄博255031
出 处:《现代技术陶瓷》2016年第1期47-53,共7页Advanced Ceramics
基 金:山东省自然科学基金(ZR2015EL005)
摘 要:为了改善纯ZrO_2气凝胶的高温稳定性,本研究以TEOS为硅源,以硝酸氧锆为锆源,通过滴加环氧丙烷,制备了ZrO_2-SiO_2复合气凝胶,探索了锆硅比例和热处理温度对复合气凝胶结构和性能的影响,结果表明,当锆硅比例为1:1时,制备的复合气凝胶比表面积最大,为551.7 m2/g;1000°C热处理后的比表面积为239.3 m2/g,1200°C热处理后的比表面积为89.5m2/g。与纯ZrO_2气凝胶相比,本研究所制得的ZrO_2-SiO_2复合气凝胶具有更好的热稳定性。In order to improve the high temperature structural stability of pure zirconia aerogels, ZrO_2-SiO_2 composite aerogels were prepared by dropping propylene oxide, with TEOS as the silicon source and zirconyl nitrate as the zirconium source. This paper explored the effects of the molar ratio of zirconium and silicon and heat treatment temperature on the structure and properties of the prepared ZrO_2-SiO_2 composite aerogels. The results showed that, when the molar ratio of zirconium and silicon was 1:1, the prepared composite aerogels had the highest specific surface area of 551.7 m2/g. After being heat-treated at 1200°C, the specific surface area of composite aerogels decreased to 89.5 m^2/g. Compared to the pure ZrO_2 aerogels, the ZrO_2-SiO_2 composite aerogels had better thermal stability.
关 键 词:ZrO2-SiO2复合气凝胶 比表面积 热稳定性
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.38