基于工序优化的曲面数控加工研究  

Curved Surface NC Machining Based on Process Optimization

作　　者：刘建炜[1] 乔龙阳 陈柏良[1] 陈上涛 

机构地区：[1]阳江职业技术学院机电系,广东阳江529500

出　　处：《机械工程与自动化》2016年第2期209-210,共2页Mechanical Engineering & Automation

摘　　要：通过分析曲面零件图,得出常规化的工艺路线,在此基础上优化得到更加适合多特征曲面加工的工艺方法,并在UG编程软件上实现,最终验证了其良好的效果。The process route directly determines the quality of machined parts.Through the analysis of a curved surface part drawing,the normalized process route was obtained.Based on the normalized process,an optimized machining process was got,and realized in UG software.The experiment shows using the optimized method can obtain a better effect.

关 键 词：曲面加工 工艺路线 优化 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]