检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:蔡力伟[1,2] 潘风明[1] 郭利泉 于思源[3]
机构地区:[1]南京航空航天大学应用物理系,南京211106 [2]南京英田光学工程有限公司,南京210046 [3]哈尔滨工业大学空间光通信技术研究中心,哈尔滨150080
出 处:《光电工程》2016年第3期52-57,共6页Opto-Electronic Engineering
基 金:国家自然科学基金资助项目
摘 要:在激光通信地面光终端的研制过程中,为保证主光学系统获得较高的成像质量和稳定的光轴指向,对次镜结构系统的动态稳定性提出了较高的要求。本文采用有限元分析方法,建立了地面光终端次镜系统的结构分析模型,分析了在施加不同偏置和预紧力情况下次镜结构系统的动态稳定性,得到了翼片偏置大小、预紧力大小与系统固有频率的曲线关系,为提高次镜结构系统的抗扭转刚度和动态稳定性提供了理论参考,对地面光终端次镜系统结构优化设计具有重要的指导意义。In the development of the laser communication ground optical terminal, the dynamic stability of secondary mirror structure system plays an important role in ensuring the high image quality and stable optical axis orientation. By means of Finite Element Method(FEM), the dynamic stability of secondary mirror structure system has been analyzed by applying variable offset distances and preloads. The natural frequency of secondary mirror structure system increases with the offset distances, presenting a maximum around 20 mm at variable preloads. While, the curvilinear relationship between natural frequency and preloads shows a monotonic increasing function. The results provide a theoretical reference to improve the torsional stiffness and the dynamic stability of secondary mirror structure system, which helps to optimize the structure design of secondary mirror system of laser communication ground optical terminal.
分 类 号:TH751[机械工程—仪器科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198