合金化热镀锌汽车外板冲压脱锌分析及改进  

The Analysis and Quality Control of JAC340H GA Coating Flaking in Stamping

作　　者：孙方义[1] 陈园林[1] 冯冠文[1] 

机构地区：[1]武钢研究院,湖北武汉430080

出　　处：《武汉工程职业技术学院学报》2016年第1期32-34,共3页Journal of Wuhan Engineering Institute

摘　　要：通过镀层质量分析、镀层合金化程度试验,并对比生产工艺,合金化热镀锌板料JAC340H钢冲压脱锌产生原因为镀层上下表面及镀层同一表面不同位置的厚薄不均,导致合金化程度不一致,合金化炉加热段采用1200kW的感应加热功率加重了钢板粉化程度;通过控制热轧原料板形、锌层厚度、合金化炉感应加热器功率,改善后产品满足了用户使用要求。Regarding agalvannealed grad JAC340H,there was flaking issue during stamping.The coating quality was analyzed and the assessment test for galvannealed degree was carried out.After checking the process technology in manufacturing,the root cause of flaking was found out to be the coating thickness deference,which resulted in ununiformity of galvannealed degree,also the induction heating power of 1200 kW increased the powdering.Through controlling the shape quality of hot rolled plate,coating thickness and induction heating power of the alloying furnace,the flaking issue was solved and finally the improved product met the requirement of custumers.

关 键 词：合金化 脱锌 热镀锌钢板 汽车外板 

分 类 号：TG157[金属学及工艺—热处理]