基于3D打印民族工艺品的快速原型构造  

Rapid Prototyping of Ethnic Crafts Based on 3D Printing

作　　者：张翠翠[1] 古文全[1] 吴健[1] 李英[1] 吴泽宏[1] 

机构地区：[1]贵州省冶金化工研究所,贵阳550002

出　　处：《价值工程》2016年第11期98-100,共3页Value Engineering

基　　金：贵州省科学院青年基金;黔科院J合字[2015]13号;贵州科学院省级科研专项资金;黔科院科专合字[2014]05号;贵州省科技计划;黔科合SY字[2014]3037号;贵阳国家高新区研发机构(GXYF2014-006);技术创新项目计划[2014]26号;贵阳国家高新区研发机构(GXYF2015-008)

摘　　要：民族工艺品作为重要的非物质文化遗产,对其进行数字化保护、创新设计与开发具有重要的现实意义。传统方法对复杂曲面的工艺品进行保护与开发存在一定的局限性。针对这一难题,课题从贵州民族工艺品(泥哨)着手,综合对比分析现有几种快速成型方法,利用3D数字建模、与3D打印技术,开展面向民族工艺品3D打印关键技术的研究。实现设计制造一体化,将整个过程数字化、自动化与三维模型直接关联,所见即所得,工艺品随时制造与修改;同时缩短工艺品开发周期,降低其开发成品。Ethnic handicrafts as important intangible cultural heritage, its digital protection, innovative design and development has important practical significance. There are some limitations for traditional methods to protect and develop complex curved surface handicrafts. To solve this problem, the topic, starting with Ethnic handicrafts （clay whistle） in Guizhou, comprehensively analyzes several existing rapid prototyping methods and uses 3D digital modeling and 3D printing technology to research the key technology for national crafts 3D printing. It will achieve the integration of design and manufacturing, the whole process of digitization, automation and directly related to the three-dimensional model, WYSIWYG, handicrafts manufacturing and modification at any time, and reducing handicrafts development cycle while reducing development costs.

关 键 词：民族工艺品 数字化 快速成型 创新设计 3D打印 

分 类 号：TB47[一般工业技术—工业设计]