车床主轴箱体采用不同定位基准的孔径加工精度的仿真  

Simulation analysis of machining accuracy of lathe spindle box with different position reference

作　　者：王梓卉敏 梁楠[1] 李润强[1] 柴紫维 徐泽宁[1] 

机构地区：[1]辽宁科技大学机械工程与自动化学院,辽宁鞍山114051

出　　处：《辽宁科技大学学报》2016年第1期66-69,共4页Journal of University of Science and Technology Liaoning

摘　　要：针对某型车床主轴箱体孔径加工的特点和采用不同的定位基准对孔与孔之间的位置精度的直接影响,选择3种不同的定位方式来进行对比,即以较大的孔为定位基准、以较小的孔为定位基准和孔之间互为基准进行仿真,选择最佳的定位基准来提高某型主轴箱体主要孔径的加工精度。研究结果表明,采用小孔为定位基准来保证孔与孔之间的位置精度优于较大的孔为定位基准。In this paper,according to the characteristic of some model lathe spindle box aperture processing and using different benchmark the positioning of the hole to finish the different benchmark of positioning acuuratelly. Three different position accuracy methods,namely the hole for the locating datum for the larger,smaller hole for the locating datum and hole between each benchmark simulation,were chosen to select the optimium the locating datum. The result of research shows that the small hole for the locating datum to assure two holes’ location accuracy is better than the bigger hole.

关 键 词：主轴箱体 孔径加工 仿真分析 定位基准 加工精度 

分 类 号：TH161[机械工程—机械制造及自动化]