海洋电磁探测发射机可控源电路小信号建模  

Small-signal Modeling for Controlled-source Circuit of Marine Electromagnetic Detection Transmitter

作　　者：陶海军[1,2] 张一鸣[1] 任喜国[1] 

机构地区：[1]北京工业大学电子信息与控制工程学院,北京100124 [2]河南理工大学电气工程与自动化学院,河南焦作454003

出　　处：《北京工业大学学报》2016年第5期684-690,共7页Journal of Beijing University of Technology

基　　金：国家重大科研装备研制项目(ZDYZ2012-1-05-01)

摘　　要：海洋电磁探测发射机通过向海底发射大功率变频的电磁波,来获取海底结构和矿产资源的分布规律,目前发射机存在效率低、发热严重等问题,为此采用软开关可控源电路来降低电路损耗.为了提高输出电磁波的瞬态性能,需建立可控源电路的数学模型,进行闭环控制.针对软开关可控源电路工作时状态多、直接建模困难问题,在硬开关可控源电路建模的基础上,通过分析输出滤波电感电流、变压器漏感、输入电压对软开关可控源电路占空比变化的影响,建立了软开关电路的小信号模型,最后通过仿真和实验验证了模型的正确性和有效性.Marine electromagnetic transmitter transmits large power frequency conversion electromagneticwave to the seabed to obtain the submarine structure and mineral resources, however, the currenttransmitter has the problem of low efficiency,serious heat and poor ability to adapt to the load, for whichthe use of softswitching circuit controlled source is to reduce circuit losses. The mathematical model ofcontrolled source circuit needs to be established to realize closed loop control for increasing outputtransient performance of the electromagnetic wave. Because the softswitch controlled source circuit hasmore status and it is more difficult to directly model, on the basis of modeling of hard switchingcontrollable source circuit, by analyzing the impact of output filter inductor current transformer leakageinductance, input voltage soft switching controllable source on change in the duty cycle, smallsignalmodel of softswitching circuit is established. Finally, simulations and experiments verify the correctnessand validity of the model.

关 键 词：海洋电磁探测发射机 可控源电路 软开关 硬开关 

分 类 号：TM56[电气工程—电器]