圆形及方形截面柱塞与其导向孔的热变形分析  

Thermal Deformation Analysis on Circular and Square Section Plunger and the Guide Hole

作　　者：吴士波[1] 赵升吨[1] 范淑琴[1] 

机构地区：[1]西安交通大学机械工程学院,陕西西安710049

出　　处：《机床与液压》2016年第7期112-115,共4页Machine Tool & Hydraulics

基　　金：国家重大科技专项(2012ZX04004021);国家自然科学基金资助项目(51305333);陕西省科学技术研究发展计划工业攻关计划(2014K07-23)

摘　　要：柱塞泵在工作温度下容易产生局部磨损现象,根据某型径向柱塞泵的相关参数计算得到柱塞泵的工作温度;通过对圆形与方形截面柱塞及其导向孔热变形的分析,得到两种不同截面柱塞与导向孔的相对热变形量。分析结果表明:方形截面柱塞与导向孔在热变形情况下基本可以保持面面接触的配合关系,该种截面的柱塞及其导向孔可应用于柱塞泵。Piston pump is easy to produce the local wear phenomena at operating temperature,according to the parameters of a certain type of radial piston pump the working temperature was calculated. Through the thermal deformation analysis of the circular and square section of the plunger and the guide hole,we get the relative thermal deformation of two different cross-section plunger and the guide hole was got. The analysis result shows that the relationship between the plunger and the guide hole square section can basically maintain a face to face contact during thermal deformation,this section plunger and the guide hole can be applied to piston pump.

关 键 词：方形截面 工作温度 热变形 配合关系 

分 类 号：TK401[动力工程及工程热物理—动力机械及工程]