耐磨台虎钳钳口衬板用钢的淬透性研究  

Study of Harden-ability of Wearable Mechanical Liner Steel

作　　者：李洁[1] 唐学鑫[1] 

机构地区：[1]泸州职业技术学院机械工程系,四川泸州646005

出　　处：《铸造技术》2016年第4期670-672,共3页Foundry Technology

摘　　要：以中碳铬钼合金钢作为研究对象,通过相变点试验确定试验钢的淬火温度范围为904~954℃,最佳淬火温度为920℃。淬火后,该材料主要组织为均匀细小的针状马氏体和少量残余奥氏体;通过淬透性试验证明,淬硬层深度为150 mm,该衬板最厚部位约为123 mm,故该材料经920℃淬火后具有足够的淬透性。The quenching temperature range of carbon-chromium-molybdenum alloy steel was determined by testing phase transition point. The results show that the quenching temperature range is about 904 - 954 ℃. By observing the microstructure, the best quenching temperature is 920 ℃. After 920 ℃ quenching, the hardened layer depth is 150 mm. Due to the maximum thickest of the steel liner is about 123 mm, so the steel has sufficient harden-ability after 920 ℃ quenching.

关 键 词：中碳铬钼合金钢 耐磨机械衬板 显微组织 淬透性 

分 类 号：TG142.1[一般工业技术—材料科学与工程]