低频振动小孔径内壁面微结构电解加工技术研究  

Study on Microstructure of the Inner Wall Surface in Samll Hole by Electrochemical Machining with Low-frequency Vibration

作　　者：张垚彬 王明环[1] 

机构地区：[1]浙江工业大学特种装备制造与先进加工技术教育部/浙江省重点实验室,浙江杭州310012

出　　处：《电加工与模具》2016年第2期31-34,共4页Electromachining & Mould

基　　金：浙江省自然科学基金资助项目(LY13E050019);国家自然科学基金资助项目(50905165)

摘　　要：为了研究低频振动电解加工对小孔径内壁面加工的影响,采用数值模拟和实验相结合的方法进行电解加工,分析影响加工结果的工艺参数及低频振动对小孔径内壁面加工精度的影响。结果表明:采用阴极低频振动加工小孔径内壁面,有利于加工间隙内电解液的循环更新和电解产物、电解热的排除,提高加工精度,改善加工定域性,同时也延长了工具电极的寿命。In order to study the effect on process for small hole of the inner wall surface by lowfrequency vibration electrochemical machining（ECM）,by ECM combinated experiment and numerical simulation,process parameters affectting the processing results and the affect on accuracy of the inner wall surface in small hole by ECM with low-frequency vibration were studied. The results show that the ECM with low-frequency vibration is conducive to exclude electrolysis products,electrolysis heat and renewal the electrolyte in the machining gap,improve the accuracy and locality of processing,but also extend the life of the tool electrode.

关 键 词：低频振动 螺旋孔加工 加工精度 

分 类 号：TG662[金属学及工艺—金属切削加工及机床]