基于BIM的结构钢筋与机电系统翻模研究——以福州市规划院产业楼为例  

A case study( PDR office building) of structural reinforced bar and MEP system remodelling via BIM model

作　　者：连立川 张鹏程[1,2] 刘燕妮[1,2] 范冰辉[3] 戴薇原 

机构地区：[1]福建工程学院土木工程学院,福建福州350118 [2]福建省土木工程新技术与信息化重点实验室,福建福州350118 [3]福州大学土木工程学院,福建福州350116 [4]福州市规划设计研究院轨道交通所,福建福州350108

出　　处：《福建工程学院学报》2016年第1期24-27,共4页Journal of Fujian University of Technology

基　　金：国家自然科学基金资助项目(51308120);福建省自然科学基金资助项目(56237845);福建省高校杰出青年科研人才培育计划资助项目(GY-Z15120)

摘　　要：基于建筑信息模型(building information modelling,BIM)概念,以福州市规划设计研究院新建大楼为实际案例,应用Autodesk Revit软件将原有CAD图纸进行BIM结构钢筋和机电模型建置,并提出BIM技术虚拟仿真过程中发现的问题。研究结果表明:(1)BIM技术可实际解决工程常常出现钢筋复杂节点、机电管道碰撞的问题;(2)机电系统进行Revit翻模时,不能按原CAD路径绘制,族库不全需建族完善。该研究成果可为后期施工决策提供技术支持,并有助于相关行业人士学习与借鉴。Taking Fuzhou Planning Design and Research Institute（ PDR） research building as a real case,Autodesk Revit was employed to remodel structural reinforced bar and MEP builder designed by CAD via building information modelling（ BIM）. Problems involved in BIM application during virtual simulation process were revealed. The results are as follows：（ 1） BIM can solve the problems such as structural reinforced bar complex nodes and complex pipeline collisions in practical engineering;（ 2） It is inconvenient to build BIM model based on the original CAD design drawing and needs to build various family components while remodelling MEP system through Revit software.The results can provide technical support for the later construction decision-making and can provide references for experts in the relevant fields.

关 键 词：建筑信息模型 AUTODESK REVIT 复杂节点处理 碰撞检查 翻模处理 

分 类 号：TU17[建筑科学—建筑理论]