球料比对钨掺杂磷酸锂靶材性能的影响  

Effect of Ratio of Grinding Media to Material on the Properties of Tungsten-doped Lithium Phosphate Targets

作　　者：彭伟[1,2,3] 朱佐祥 皮陈炳 蔡雪贤 尚福亮[1,2,3] 杨海涛[1,2,3] 

机构地区：[1]深圳大学材料学院,广东深圳518060 [2]深圳市特种功能材料重点实验室,广东深圳518060 [3]深圳陶瓷制备先进技术工程实验室,广东深圳518060

出　　处：《中国钨业》2016年第2期53-57,共5页China Tungsten Industry

基　　金：深圳市科技研发资金基础研究计划资助项目(JCYJ20140418181958489)

摘　　要：采用常压烧结法制备W掺杂Li_3PO_4陶瓷靶材,通过改变WC磨球与Li_3PO_4粉末原料质量比大小,确定W掺杂Li_3PO_4陶瓷靶材的最佳制备工艺。通过XRD测定靶材物相结构,SEM观察靶材的断面形貌,万能实验机测量靶材的抗弯强度,维氏显微硬度仪测量靶材的维氏硬度,阿基米德排水法测量靶材密度等,对W掺杂Li_3PO_4靶材的性能进行了分析表征。研究表明,WC与Li_3PO_4球料比为2∶1的条件下获得的W掺杂Li_3PO_4陶瓷靶材的综合性能最佳,靶材的相对密度达到92.24%,抗弯强度达到38.34 MPa,维氏硬度达233.810,HV0.3。This paper dealt with the preparation of tungsten trioxide doped lithium phosphate target by traditional solid-state sintering method.The effect of the WC ball to powder ratio on the properties of the targets was studied,which determined the optimal preparation of W doped Li3PO4 ceramic target.The phase structure of the target was analyzed by X-ray diffractometer and the fracture morphology was observed by SEM.The bending strength and the Vickers hardness were measured by universal-testing machine Vickers microhardness instrument respectively.Then,the researchers measured the density using Archimedes drainage method.The results indicate that the best doping mass of the ball to powder ratio of WC and lithium phosphate power is 2 ∶1.The sintered tungsten-doped lithium phosphate ceramic target can achieve a relative density of 92.34 %,a bending strength of 38.34 MPa and a Vickers hardness of 233.810 MPa.

关 键 词：碳化钨 掺杂 Li3PO4靶材性能 球料比 常压烧结法 力学性能测试 

分 类 号：TQ131.11[化学工程—无机化工]