高带宽压电陶瓷驱动电源  

High Bandwidth Amplifiers for Piezoelectric Actuator

作　　者：王彭[1] 宋克非[1] 

机构地区：[1]中国科学院长春光学精密机械与物理研究所,吉林长春130033

出　　处：《仪表技术与传感器》2016年第3期21-23,共3页Instrument Technique and Sensor

摘　　要：压电激振器是超声导波无损检测应用中的关键部件,针对激振器对压电驱动电源高带宽和大功率的要求,设计并研制了一种基于高压运放MP108的压电陶瓷驱动电源。采用直接数字频率合成技术产生信号源,信号经过前级放大和滤波后输入到高压运放电路驱动压电陶瓷。分析了大功率驱动电源的散热问题,指出驱动电源散热片到空气的最大热阻为1.1℃/W。实验结果表明,当负载为10 nf时,驱动电源在10～300 k Hz的频带范围内能够实现100Vp-p的放大输出,基本满足超声导波压电激振器的驱动要求。Piezoelectric actuator is the critical component in ultrasonic guided wave detection. As the piezoelectric actuator demands high power and high bandwidth driving power,a piezoelectric driving power based on high-voltage amplifier MP108 was designed and developed. The signal source was generated by direct digital frequency synthesis technique then amplified and filtered before sent to the high-voltage amplifier. Thermal dissipation of the driving power was analyzed and the maximum thermal resistance from the heat sink to air is 1. 1 ℃ / W. The experiment verifies that the driving power can output 100 Vp- pin bandwidth from 10 k Hz to 300 k Hz when the load is 10 nf,which can satisfy the request of the ultrasonic guided wave piezoelectric actuator.

关 键 词：压电陶瓷 高压运放 高带宽 超声导波 

分 类 号：TP384[自动化与计算机技术—计算机系统结构]