机械式挖掘机整机设计参数的确定  

The Method of Determine the Parameters of Large Mechanical Excavator

作　　者：林贵瑜[1] 王万振 安兆强[2] 张永明[3] 

机构地区：[1]东北大学机械工程与自动化学院,辽宁沈阳110819 [2]沈阳发动机设计研究所,辽宁沈阳110015 [3]太原重工股份有限公司技术中心,山西太原030024

出　　处：《机械设计与制造》2016年第5期27-29,34,共4页Machinery Design & Manufacture

基　　金：国家863项目(2012AA062001)

摘　　要：如何确定机械式挖掘机的总体设计参数往往困惑设计者,针对现行大型机械式挖掘机的样本范围（5-75）m3,利用曲线拟合方法,并经最优拟合方程判定原则,对残余平方和、相关系数、调整自由度后的相关系数以及残余标准差进行判别,然后分别对履带最大牵引力和斗容的关系、提升电机额定功率和斗容积的关系、整机重和斗容积的关系以及推压电机额定功率和斗容积的关系建立了最优拟合方程,为机械式挖掘机的整机设计参数预测提出了一种可行方法,具有应用价值。The way to determine the overall design parameters of mechanical excavator often confuses designers. For large mine excavator samples range（5 -75）m3,it uses curve fitting methods and judges by the principle of the optimum fitting equation,discriminating among the residual sum of squares,correlation coefficient,correlation coefficient after adjusting the degrees of freedom and residual standard deviation,then the optimum fitting equations can be established respectively for the relationship between tracked maximum traction and bucket capacity,rated power of the hoisting motor and bucket capacity,the whole machine weight and bucket capacity,rated power of the pushing motor and bucket capacity. The research,which puts forward a feasible method for large mechanical parameter prediction of the machine,has application value.

关 键 词：挖掘机 总体参数 曲线拟合 拟合方程 判别原则 

分 类 号：TH16[机械工程—机械制造及自动化]