高贝利特硫铝酸盐复合水泥发泡保温板的制备  

Preparation of high Belite sulphoaluminate cement composite cement-based foamed thermal insulation board

作　　者：刘成健 张振秋 葛仲熙 

机构地区：[1]唐山北极熊建材有限公司,河北唐山063705

出　　处：《混凝土》2016年第4期126-129,140,共5页Concrete

基　　金：国家科技支撑计划项目子课题(2013BAJ01 B04-2)

摘　　要：通过用高强双快高贝利特硫铝酸盐水泥与普通硅酸盐水泥按一定比例复合后,极大程度上加快了普通硅酸盐水泥的水化反应速率;使复合后形成的水泥基发泡保温板的脱模时间大大缩短,早期强度明显提高,后期强度持续增长,完全解决了普通硅酸盐水泥发泡保温板容易开裂的问题。在相同干密度的前提下,分别对比了不同复合比例浆体流动度、脱模时间及各龄期的抗压强度,最终确定了高强双快高贝利特硫铝酸盐水泥与普通硅酸盐水泥以40%∶60%比例复合后,干密度为180 kg/m^3时,抗压强度最高,1 d为0.33 MPa,28 d为0.57 MPa,脱模时间:3 h,导热系数为0.054 W/(m·K),完全达到建材行业标准并满足工业化生产的需要,为最优复合比例。After high strength fast setting high Belite sulphoaluminate cement and portland cement according to proportion composite, greatly speeds up the portland cement hydration reaction rate. After composite cement - based foamed thermal insulation board stripping time is significantly reduced, the early strength improved greatly, the final strength sustained growth, completely solves the Portland cement foamed thermal insulation board easy to crack problem. In the dry density of the same premise, respectively compare to slurry flu- idity stripping time and each age compressive strength at the different composite proportion,finalize after high strength fast setting high Belite sulphoaluminate cement and portland cement according to composite proportion 40% ：60% is the best composite proportion, dry density ： 180 kg/m^3, the compressive strength is supreme 1 d ：0.33 MPa,28 d ：0.57 MPa, stripping time ： 3 h, coefficient of thermal con- ductivity ：0.054 W/（ m. K ） ,fully meet JC and the needs of industrial production.

关 键 词：高强双快高贝利特硫铝酸盐水泥 复合水泥 水泥基发泡保温板 脱模时间 

分 类 号：TU528.7[建筑科学—建筑技术科学]