Effect of Cooling Rate on Microstructure and Mechanical Properties of 20CrNi2MoV Steel  

作　　者：Jian Zhang Chang-Sheng Li Bin-Zhou Li Zhen-Xing Li Xue-Dong Pang 

机构地区：[1]State Key Laboratory of Rolling and Automation,Northeastern University, Shenyang 110819, China [2]Fushun Special Steel Co. Ltd, Fushun 110003, China

出　　处：《Acta Metallurgica Sinica(English Letters)》2016年第4期353-359,共7页金属学报（英文版）

基　　金：financially supported by the National High Technology Research and Development Program of China(No.2012AA03A503);the National Natural Science Foundation of China(Nos.51174057 and 51274062);Research Fund for the Doctoral Program of Higher Education of China(No.20130042110040)

摘　　要：Thermo-mechanical process and continuous cooling process were carried out on 20CrNi2MoV steel. Three cooling rates were implemented to optimize the mechanical properties. The microstructure evolution, precipitation behavior, and strengthening mechanisms were systematically investigated, and the fracture mechanisms were analyzed via combination of impact fracture morphologies and deflection-load curves. The experimental results indicate that the transformed microstructure of experimental steel is all complex consisting of granular bainitic ferrite and bainitic ferrite with dispersed martensite/austenite （M/A） constituents in the matrix at cooling rates of 13, 21, and 29 ℃/s. When the cooling rate increases, the grain of the steel is obviously refined. The sizes of the bainitic ferrite are 5.8, 4.7, and 3.1 μm under cooling rates of 13, 21, and 29 ℃/s, respectively. The refinement of the bainitic ferrite plays a dominant role in strength increasing and also contributes to high crack propagation energy. However, the morphologies of M/A constituents obtained under different cooling rates contribute to different crack initiation energies and then affect the impact property.Thermo-mechanical process and continuous cooling process were carried out on 20CrNi2MoV steel. Three cooling rates were implemented to optimize the mechanical properties. The microstructure evolution, precipitation behavior, and strengthening mechanisms were systematically investigated, and the fracture mechanisms were analyzed via combination of impact fracture morphologies and deflection-load curves. The experimental results indicate that the transformed microstructure of experimental steel is all complex consisting of granular bainitic ferrite and bainitic ferrite with dispersed martensite/austenite （M/A） constituents in the matrix at cooling rates of 13, 21, and 29 ℃/s. When the cooling rate increases, the grain of the steel is obviously refined. The sizes of the bainitic ferrite are 5.8, 4.7, and 3.1 μm under cooling rates of 13, 21, and 29 ℃/s, respectively. The refinement of the bainitic ferrite plays a dominant role in strength increasing and also contributes to high crack propagation energy. However, the morphologies of M/A constituents obtained under different cooling rates contribute to different crack initiation energies and then affect the impact property.

关 键 词：20CrNi2MoV steel MICROSTRUCTURE Cooling rate Mechanical properties 

分 类 号：TG142.1[一般工业技术—材料科学与工程]