一种新型的串联型有源电力滤波器  

A New Type Series Active Power Filter

作　　者：董爱华[1] 杨汭琴 仝兆景[1] 

机构地区：[1]河南理工大学电气工程与自动化学院,河南焦作454000

出　　处：《测控技术》2016年第4期140-144,共5页Measurement & Control Technology

基　　金：国家自然科学基金项目(61340015);河南省科技攻关项目(142102210048);河南理工大学博士基金(B2010-108)

摘　　要：为了消除基波磁通补偿(FMFC)有源电力滤波器(APF)的控制延时,提高APF的电流跟踪性能,提出了采用基于预测电流补偿的新方法。建立了基于预测电流控制的基波磁通补偿有源滤波器的数学模型,采用离散化的方法预测下一周期参考电流值,实现APF电流的预测控制。这种控制方法可以消除采样、计算等带来的延时,具有开关频率固定、电压利用率高、开关损耗小、动态响应快等优点。最后,在此基础上搭建了实验平台,仿真与实验结果证明了将预测电流控制方法应用于基波磁通补偿有源滤波器的有效性和可行性。In order to eliminate the control delay and improve the current tracking performance of the fundamental magnetic flux compensation（FMFC） active power filter（APF）,a new method of predicted current compensation is proposed.A current control mathematical model of FMFC APF is established,with the discrete current forecasting methods to predict the reference current value of the next cycle,the APF predictive current control is achieved.This control method can eliminate the delay caused by sampling and calculating,which has the advantages of fixed switching frequency,high voltage utilization,low switching losses and fast dynamic response.Finally,an experimental platform is built,the simulation and experimental results confirme the availability and feasibility of predictive current control strategy applied to the FMFC APF.

关 键 词：预测电流控制 磁通补偿 有源电力滤波器 电流跟踪 

分 类 号：TM451[电气工程—电器]