基于FPGA射频接收机前端AGC系统电路的设计  

Design of RF Receiver AGC System Circuit Based on FPGA

作　　者：李飚[1] 刘春群[1] 黄忠快[1] 

机构地区：[1]百色学院信息工程学院,广西百色533000

出　　处：《无线电通信技术》2016年第3期82-84,共3页Radio Communications Technology

基　　金：百色学院科研基金项目(2013KB08)

摘　　要：基于FPGA设计了一射频接收机前端AGC系统电路。根据AGC系统电路工作和控制原理,讨论了系统设计的难点和设计方案,选取了ADL5330、A/D转换器AD5760、Xilinx virtex-6、D/A转换器DAC8760等芯片搭建设计了系统硬件电路。测试结果表明系统电路在900~990 MHz及60 d B输入动态范围内,输出信号功率能够保持在-16.5 d Bm附近,且输出功率可调。系统硬件电路具有体积轻小、高灵敏度和稳定性。The purpose of this paper is to design an RF receiver AGC system circuit based on FPGA. According to the operating principle and control theory of AGC system,combining with the requirements of design specifications,using ADL5330,AD5760,Xilinx virtex- 6,DAC8760 ICs,the hardware circuit had been designed. The test results are listed below： with 90 MHz bandwidth and 60 d B dynamic range of input signal power,the output signal power has flatness lower than ±1.5d B and adjustable output signal power.

关 键 词：接收机 AGC系统 动态范围 信号功率 

分 类 号：TN925.1[电子电信—通信与信息系统]