汽油加氢改质技术配套系列催化剂性能评价  

Performance evaluation of series catalysts for gasoline hydro-upgrading

作　　者：杨红强 王廷海 刘俊涛 全民强 

机构地区：[1]中国石油兰州化工研究中心,甘肃兰州730060

出　　处：《石化技术与应用》2016年第3期212-215,共4页Petrochemical Technology & Application

摘　　要：以中国石油辽河石化公司催化裂化（FCC）汽油为原料,采用工业生产的GDS-20,GDS-30,GDS-40催化剂及GDS-10保护剂,在360 m L绝热评价装置上,根据GARDES技术对催化剂性能进行了评价。结果表明：全馏分FCC汽油在105℃下进行预加氢,然后将其按55~65℃切割为轻重馏分;在GDS-30,GDS-40催化剂反应温度分别为190,325℃的条件下,将轻汽油馏分与改质后重汽油馏分以3/7（质量比）调和,调和产品的脱硫率为80.6%,脱硫醇硫率为76.7%,辛烷值损失仅0.1个单位,满足国Ⅳ汽油质量升级的要求。The performance evaluation of industrial production of GDS- 20,GDS- 30,GDS- 40 catalyst and GDS- 10 protective agent was investigated by GARDES technology with Liaohe catalytic cracking gasoline as the feedstock in a 360 m L thermal insulation evaluation device. The results showed that all fractions of FCC gasoline were pre- hydrogenated at 105 ℃,then the light and heavy gasoline fractions were cut in terms of 55- 65 ℃. After the light gasoline fraction blended with the modified heavy oil fraction（ mass ratio 3 /7）,its desulfurization rate,mercaptan sulfur removal rate and octane number loss of blended product was 80. 6%,76. 7%,0. 1units respectively,which could meet the quality upgrade requirement of national gasoline standard Ⅳ.

关 键 词：催化裂化汽油 催化剂 性能评价 调和汽油 

分 类 号：TE626.21[石油与天然气工程—油气加工工程]