AlCl_3-乙醇络合催化剂催化1-癸烯聚合  

Polymerization of 1- decene with aluminum chloride- alcohol complex as catalyst

作　　者：李红平 张海忠 

机构地区：[1]中国石油润滑油公司兰州润滑油厂,甘肃兰州730060

出　　处：《石化技术与应用》2016年第3期243-245,共3页Petrochemical Technology & Application

摘　　要：以1-癸烯为原料,Al Cl3-乙醇络合物为催化剂,在1-癸烯用量为10 t,反应温度为120~125℃,反应压力低于0.4 MPa,络合催化剂采用分4批加入（每批反应时间为30 min）且总质量分数为4.0%的条件下,可以制备聚α-烯烃（PAO）合成油,并对产物进行了蒸馏分离。结果表明：馏程分别为〉220~270,〉270℃的馏分黏度指数分别大于120.0,130.0,二者收率分别为21%,51%;PAO总收率达到83%。Poly- α- olefin synthetic oil was prepared with 1- decene as raw material,aluminum chloride- alcohol complex as catalyst at material amount 10 t,reaction temperature 120- 125 ℃,reaction pressure less than 0. 4 MPa,adding complex catalyst at 4 batches（ reaction time 30 min at each batch） and its total mass fraction 4. 0%,and products were separated by distillation. The results showed that when the distillation range was 〉 220-270,〉 270 ℃,the viscosity index of distillation cut was more than 120. 0,130. 0 respectively,and the yield of them was 21%,51% separately. The total yield of PAO reached 83%.

关 键 词：AlCl3-乙醇络合催化剂 聚Α-烯烃 合成油 收率 黏度指数 

分 类 号：TQ325.1[化学工程—合成树脂塑料工业]